Jinitiator 1.1.7.18 - toolbar
Date: Wed, 08 Sep 1999 07:54:55 -0400
From: Jeffrey Beckstrom JBECKSTROM@gcrta.org
To: OraApps-DBA@cpa.qc.ca, OraApps-L@cpa.qc.ca, oranca-l@doug.org,
Subject: Jinitiator 1.1.7.18 - toolbar
Since upgrading to this version, we notice the toolbar no longer has a
minimize button on it. Anyone else see this.
Jeffrey Beckstrom
Database Administrator
Information Systems
Greater Cleveland Regional Transit Authority
1240 W. 6th Street
Cleveland, Ohio 44113
(216) 781-4204
Date: Wed, 8 Sep 1999 09:37:54 -0700
From: McRaney Ronald-MCG32315 rmcraney@itexchsrv2.phx.mcd.mot.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: Jinitiator 1.1.7.18 - toolbar
No longer there on mine as well.
Date: Wed, 8 Sep 1999 17:33:54 -0500
From: "Logan, Ernie" Ernie_Logan@bmc.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
I have seen this affect. I have also noticed that the responsibility list
can no longer be shortened by simply typing the first letter. It now seems
to require that I click in the 'find' text box, key my letter, then press
enter.
Date: Thu, 9 Sep 1999 12:12:15 -0400
From: "Kline, Edgar" Kline@Tessco.Com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
What version of Apps and what patch level is D2K 1.6.1 at?
Edgar
Date: Thu, 9 Sep 1999 12:33:17 -0500
From: "Logan, Ernie" Ernie_Logan@bmc.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
Apps 11.0.2, D2K 1.6.1 patchset 4. Same combination with 1.1.5.21.1 does not
exhibit this behavior.
Date: Thu, 9 Sep 1999 13:41:52 -0400
From: "Kline, Edgar" Kline@Tessco.Com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
I experienced what you did with the same combo, but then with 11.0.3 D2K
1.6.1 Patchset 6, the problem of
"I have also noticed that the responsibility list
can no longer be shortened by simply typing the first letter. It now seems
to require that I click in the 'find' text box, key my letter, then press
enter."
went away. See if this is the case for you.
Edgar Lee Kline, Jr.
Senior Principal
(301) 565-4334 x415
Nextlinx Corporation
edgar_kline@nextlinx.com
8403 Colesville Road, Suite 1601
Silver Spring, MD 20910
Date: Thu, 9 Sep 1999 18:52:31 +0100
From: "Jonathan Stuart" jdstuart@globalnet.co.uk
To: oraapps-l@cpa.qc.ca
Subject: Re: JInitiator 1.1.7.18 - toolbar
JInitiator 1.1.7 seems to prevent you from selecting an option in any
picklist (not just Responsibility) by just typing the first few letters of
the option name, and as Ernie said you now have to click in the find box. We
have found this on D2K patch 6 and 7 with JDK 1.1.7 but it works fine with
1.1.5.
Jonathan.
Date: Thu, 9 Sep 1999 13:56:27 -0400
From: "Kline, Edgar" Kline@Tessco.Com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
As I noted earlier, in our install, we noted this problem at 11.0.2, D2K
1.6.1 patch 3, and Jinit 1.1.7.18, but after getting to 11.0.3 and D2K 1.6.1
patch 6 we noticed the problem going away, it was fixed everywhere. We are
running Compaq Tru64 (Digital) UNIX. Maybe that makes a difference!?
Edgar Lee Kline, Jr.
Senior Principal
(301) 565-4334 x415
Nextlinx Corporation
edgar_kline@nextlinx.com
8403 Colesville Road, Suite 1601
Silver Spring, MD 20910
Date: Thu, 9 Sep 1999 19:02:51 +0100
From: "Jonathan Stuart" jdstuart@globalnet.co.uk
To: oraapps-l@cpa.qc.ca
Subject: Re: JInitiator 1.1.7.18 - toolbar
........or maybe it is the 11.0.3 technology stack which makes the
difference? We are on 11.0.2, Ernie is on 11.0.2, but your system works fine
having upgraded to 11.0.3.
Jonathan.
Date: Thu, 9 Sep 1999 13:08:45 -0500
From: "Logan, Ernie" Ernie_Logan@bmc.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
I have an 11.0.3 I can try with my current Patchset 4. I will setup
something and see if it makes a difference.
Date: Thu, 9 Sep 1999 14:06:19 -0400
From: "Kline, Edgar" Kline@Tessco.Com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
Correct ... now I here that D2K 1.6.1 Patch 7 is really required, but is
does not seem to be ported yet for Compaq Tru64 UNIX. And that may be what
allows the toolbar to have the minimize capability!? But everything else
seems to work fine. And it actually caches the JAR files and launches MUCH
faster.
Edgar Lee Kline, Jr.
Date: Thu, 9 Sep 1999 13:22:35 -0500
From: "Logan, Ernie" Ernie_Logan@bmc.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
FWIW: I have now tested 11.0.2 and 11.0.3 on D2K patchset 4, and the pick
list behavior exhibits in both Netscape 4 and IE 4. Based on this, and
Jonathan's results, it seems quite unclear as to why this happens. We are
using HP-UX 11.0 as application server, BTW.
Date: Thu, 9 Sep 1999 14:21:58 -0400
From: "Kline, Edgar" Kline@Tessco.Com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
Move the 11.0.3 up to patch 6 for D2K and see if that fixes the issue. I
also heard minutes ago from a comrad that Patch 7 for HP-UX is now
available.
Edgar Lee Kline, Jr.
Date: Thu, 09 Sep 1999 14:50:45 -0400
From: Jeffrey Beckstrom JBECKSTROM@gcrta.org
To: OraApps-DBA@cpa.qc.ca, OraApps-L@cpa.qc.ca, oranca-l@doug.org,
Subject: re: Jinitiator 1.1.7.18 - toolbar ------ an update
Oracle support states that they can not reproduce this and have never seen
it before. Therefore, could the others who responded to me of having seen
it call support and reference my TAR 12280411.600
Original message:
Since upgrading to this version, we notice the toolbar no longer has a
minimize button on it. Anyone else see this. We are 10.7 NCA with D2k
1.6.1 +7.
Jeffrey Beckstrom
Database Administrator
Information Systems
Greater Cleveland Regional Transit Authority
1240 W. 6th Street
Cleveland, Ohio 44113
(216) 781-4204
Date: Thu, 9 Sep 1999 13:56:18 -0500
From: "Cochran, John" John.Cochran@photomask.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: JInitiator 1.1.7.18 - toolbar
The word I got from O Support was that D2k patchset 7 was required for JInit
or AV 1.17.
We are on 11.0.3/d2k patch7/Solaris - latest jinit I had until just a minute
ago was 117151. I will test 11718 and let you know.
-John
Memory taken - 11.x APPs session at Windows Terminal
Date: Thu, 9 Sep 1999 10:51:30 -0400
From: "Innamuri, Chakrapani" cinnamuri@btg.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: How much memory does a 11.x session occupy on your Windows termin
All,
Does anybody have idea about how much memory does an
APPS session occupy in the memory on our Windows terminal.
I am asking this because whenever I open TWO sessions on my windows,
my third session hangs and does not give any reponse.
I will also check the installation manual.
Thanks,
-chakrapani
Developer Server and Web Server
Date: Thu, 9 Sep 1999 10:02:06 -0500
From: Larry.Leser@IFLYATA.COM
To: oraapps-l@cpa.qc.ca
Subject: Developer Server Question
Has anyone setup a Developer Server solution for implementing applications
across the web? I am curious about the architecture required to set this
up. Do we only need the Developer Server and ANY web server? Are there
additional pieces that will be required that we will need? Are there
configuration issues to be concerned with?
Any help would be greatly appreciated.
Thanks
System Resources at Terminals
Date: Thu, 9 Sep 1999 12:40:47 -0400
From: Brian_Pellot@mail.monarch.com (Brian Pellot)
To: oraapps-l@cpa.qc.ca
Subject: 10.7SC - Exceeding Available System Resources
We are running 10.7SC on top of windows 95 and windows 98. When we open a
certain number of forms or a certain set of forms (sometimes only 3 will do
it),
we get the message
Opening this window may exceed available system resources. We recommend
closing
other windows or applications.... It then gives the options of Open or Do
Not
Open.
Some users have more problems with this than others. We have no other
applications open on the PC when this happens.
What 'System Resources' are these (physical memory, virtual memory, low
memory,
something else)?
What, if anything, can we do to increase these resources? (Other than NCA)
Thanks,
Brian
Date: Thu, 9 Sep 1999 12:31:28 -0500
From: "Logan, Ernie" Ernie_Logan@bmc.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: 10.7SC - Exceeding Available System Resources
There are various tools (some freeware) available to improve system resource
allocation. In Windows 9x, system resources are a limited (64K?) set of
memory pointers to graphical objects and certain other addressing pointers.
A major cause of low available resources is memory fragmentation due to
startup tasks. The system resources must reside in low 640K memory. So one
thing to look at is what drivers are being loaded, what order they load in,
can you load them in high memory, etc.
Check on microsoft.com for other suggestions, or alternatively, upgrade to
NT 4.0, which does not have a real limit on system resources.
Date: Thu, 9 Sep 1999 17:10:15 -0500
From: Oracle - Kathy Farmer oracleadmin@co.scott.mn.us
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: 10.7SC - Exceeding Available System Resources
No expert in this mysterious area, but I do know that we added D2kinit.exe
to all the start up files on our PCs and this seemed to improve performance
on our less robust PCs. Our typical low end PC would have only 32MB and we
have not experienced your problem even with Office apps running in the
background.
Kathy Farmer
Scott County
Forms Server - Hang problem
Date: Thu, 9 Sep 1999 18:36:42 -0800
From: Amos Gingerich agingerich@gci.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: Forms Server - AIX Problem
We're an AIX 4.3.2 site running 11.0.2 of the apps and 8.0.4.3.1 of the
database. Our Forms version is 4.5.10.6. and we're running 2.5.7.5 of
Reports all on a single Tier. We've had a couple of "hang" situations
where the app stops responding and bouncing the Application Server and the
Forms Server solved it. Today we had a situation where the concurrent
request screen hangs on submit when submitting a request for a report.
Other requests would still run. I bounced the components one at a time - no
luck. Bounced everything including the DB - it cleared. I do see some
periodic core dumps from f45webm. Any ideas anyone?
Amos Gingerich
DBA
General Communications Inc
(907)265-5488
agingerich@gci.com
Maximum Open Cursors exceeded - ORA 01000 error
Date: Fri, 10 Sep 1999 15:25:50 -0500
From: Cindy Schiffgens Cindy.Schiffgens@tpwd.state.tx.us
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: Max cursors error
Has anyone encountered the error "ORA-01000: maximum open cursors exceeded"?
This in the face of setting our init.ora parameter max_open_cursors sky high
and seeing no entry in the alert log when it happens, and not happening to
ad hoc users submitting complex queries with SQL Plus. Definitely comming
from Oracle Applications client side software.
Date: Fri, 10 Sep 1999 18:42:09 -0500
From: "Landa, Mark (c)" U25MIBG@Carlson.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: Max cursors error
Try: open_cursors=512. You should not have any more problems.
AIAP exe not found
Date: Tue, 14 Sep 1999 12:24:13 +0530
From: "PARAMESWARAN SUBRAMANIAM" params@wipsys.soft.net
To: oraapps-l@cpa.qc.ca
Subject: AIAP exe not found
hi all
Have just finished installing OraApps 10.7 on NT Server 4.0. But the
problem is I am unable to locate the AIAP exe file which shld have been
in the ORANT\Bin directory.
Have checked the adaimgr.log, and every log file for any error. No error
reported
Am a first timer. any help in resolving this problem is greatly
appreciated.
Oracle_Home - F:\Orant
Oracle_SID - Demo
TIA
Parmesh
Date: Tue, 14 Sep 1999 12:35:45 +0530
From: manoj_bhatnagar/Polaris@polaris.co.in
To: oraapps-l@cpa.qc.ca
Subject: Re: AIAP exe not found
Hi Parmesh
The file is located in \ORAWIN\BIN and not in \ORANT\BIN in case of Release
10.7.
With Regards
Manoj
Date: Tue, 14 Sep 1999 12:41:14 +0530
From: "PARAMESWARAN SUBRAMANIAM" params@wipsys.soft.net
To: oraapps-l@cpa.qc.ca
Subject: Re: AIAP exe not found
Hi Manoj
i ran a find in the whole system, it is not to be found anywhere.
Date: Tue, 14 Sep 1999 12:52:24 +0530
From: manoj_bhatnagar/Polaris@polaris.co.in
To: oraapps-l@cpa.qc.ca
Subject: Re: AIAP exe not found
Hi
Have you installed the Release 10.7 runtime files from Release 10.7 Runtime
Generic CD-ROM.
If not try installing those files.
Manoj
Date: Tue, 14 Sep 1999 22:51:09 +0500
From: Naqi Mirza mirzas@isb.apollo.net.pk
To: oraapps-l@cpa.qc.ca
Subject: Re: AIAP exe not found
hi parmesh
I cant remember but the exe ur looking for coems when you install the
runtime forms for oracl applications, which are 16bit and hence create a
cirectory called orawin, and not that standard orant (for nt) or
orawin95 (for windwos 95+). once you install the runtimes youll have a
program group created called oracle, in that you'll find an icon for
oracle applications which uses aiap.exe , i ohpe this helps.
look in the runtime generic cd you'll have two directories created from
this one called orawin and the other apps10.
rgds
naqi
OraApps with Browser
Date: Tue, 14 Sep 1999 10:45:54 -0400
From: "Dean Marsh" DMarsh@genlyte.com
To: OraApps-L@cpa.qc.ca
Subject: Using Oracle Apps through a web browser.
Hi,
Looking for a little help. We are looking at Rel. 11 for evaluation and
we are using a web browser rather than the jinitiator (for now). We can
connect to and use the applications by going to the appropriate website
using the host name (e.g. - http://hostname:8100/OA_HTML/US/VIS_s.htm),
but not if we use the IP address of the host (e.g. - http://host
IP:8100/OA_HTML/US/VIS_s.htm). We immediately get the message "The
request did not specifiy a valid virtual host".
We aren't sure if the issue is with our firewall, our DNS server, or with
the web application not knowing the IP address translation. Any help
would be greatly appreciated.
Thanks
Dean Marsh
Oracle Database Administrator
Lightolier Corp.
dmarsh@genlyte.com
Date: Tue, 14 Sep 1999 11:18:18 -0700
From: Ye He yhe@us.oracle.com
To: oraapps-l@cpa.qc.ca
Subject: Re: Using Oracle Apps through a web browser.
why would you be using the IP# instead of the hostname?
that additional layer (hostname-IP#) provides redundancy
to some degree.
Ye
Date: Tue, 14 Sep 1999 12:05:15 -0500
From: "Logan, Ernie" Ernie_Logan@bmc.com
To: "'oraapps-l@cpa.qc.ca'" oraapps-l@cpa.qc.ca
Subject: RE: Using Oracle Apps through a web browser.
Configuration of the web browser will allow what you seek. Add a second
entry to Web Listener Addresses and Ports section. For the "Host Name"
specify the IP address.
Mulitple appltops on NT
Date: 7 Oct 99 12:25:08 IST
From: senthil senthilvenkatesh@usa.net
To: oraapps-l@cpa.qc.ca
Subject: Oracle apps on NT
Hi guys...
would like to know what are the repurcussions of having mulitple appltops
on
NT... since NT has only one environment active at any point of time...
We are having two appltops one for developmenty and the other for demo.
both the appltops were installed simultaneously and demo was upgraded to
11.02. this instance is working fine.
On the development instance we did the smae and applied both CR and DR 11=
02
drivers. but the in the AR module all forms are giving a pre-form trigger,
stating no data found..
does this have to do with multiple appltops?
ur help is verymuch requested.
thanks in advance.
regards
senthil
Oracle on NT - some problems
Date: 7 Oct 99 13:04:00 IST
From: senthil senthilvenkatesh@usa.net
To: oraapps-l@cpa.qc.ca
Subject: Oracle on NT some problems !!!
Dear friends
some questions on installation...
How does one manage to setup separate appl_top for all the environemnt since
Oracle Picks up vales from the registry and therefore
one has to manipulate the FORMS45_PATH etc to point ot the correct appl_top .
I am able to connect to both the instances by starting seprate forms listener
process on diff ports. I had read thro the doc made for SDC and understood
that u have created multiple set of APPL_TOP
1. I had installed the Vision DB first and unloaded one set of ( appl_top
s/w) against it and then run adaimgr against VD11
2. After the same I created another DB called DEVP and run against the
standard steps.
3. Against the DEVP DB I unloaded the second set of APPL_TOP S/w and then
using ADAIMGR run the requsite set of steps which then created the APPL_TOP
and installed all requsite backend proc and
packages.
The version of Vision DB was 11.02. The VD11 appl_top was 11.0.
On the vd11 appl_top I unzipped the mtce pack 11.02 merg directory and applied
the cr1102.drv and dr1102.drv patch drivers to upgrade the vd11 appl_top
to
11.02.
Once the appl_top was upgraded to 11.02 we applied the India Localization
patch. Now the VD11 environment is working correctly.
DEVP appl_top was installed with a new user appldev and the environemnt
was
customised appropriately . The appl_top and other environment setting output
is as enclsoed in the attch.
On the DEVP we applied the 11.02 patch using the cr1102and dr1102 drv files
but encountered some during the running akload this was skipped using option
8 ( Hidden) of adctrl and then we tried to do the same manually.
but it did pop some error regd class def not found. On escalation to Oracle we
found that this set some profile options which can alos be set in SYSADMIN
resp.
But after upg to 11.02 we are facing major problm with AR module . No forms
within the AR module works it gives
PRE FORM Trigger NO_DATA_FOUND.
All other modules are working fine.
We have not been able to come to the solution .regarding this
Now some basic doubts
1. How does NT handle Two appl_top . Since the path in form45_path cannot
be set to both directoreies.
2. What environment setting was set using the batch scripts in SDC.
3. How were u able to upgrade the APPL_TOP seprately
4. Some people were of the ides that concurrent prog may give error if both
appl_top are being used .
5. How does forms server resolve which APPL_TOP to connect to ?
6. If the environment setting is used then since NT only allows one login
to
be active at any time inlike UNIX how does one handles multiple environments
since multiple appl_TOP setting and also Oracle_SID and other settings.
7. are there any checklist which can be used as a guideline to install to
check along the way for any discrepancies.
8. What are the things to watch out for in NT installation since we are
getting a feeling that multiple appl_top are not a very good idea.
help requested....thanks in advance
senthil